Herunterladen Inhalt Inhalt Diese Seite drucken

Switching Off Individual Cooking Zones; Automatic Protection Settings; Switching The Hob Off - hanseatic MC-IF7042B2 Gebrauchsanleitung

Induktionskochfeld
Vorschau ausblenden Andere Handbücher für MC-IF7042B2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Touching the pause sensor (8) always
switches all cooking zones to the
pause mode at the same time. Individual
cooking zones cannot be switched to the
pause mode.
Switching off individual
cooking zones
1. Touch the slider sensor for the cooking
zone which you would like to switch off.
2. Touch the corresponding slider sensor at
the left end or swipe your finger left over
the slider sensor until the heat setting dis-
play '0' appears.
H
0
The residual heat symbol '
0
ternately with the '
' symbol on the heat
level display.
CAUTION
Risk of burns!
Always switch off a cooking zone
using the corresponding slider sen-
sor; never by removing the cookware
from the cooking zone. Otherwise,
the cooking zone will be reactivated
as soon as a pot or other object made
of ferromagnetic metal is placed on
top.
Do not place objects on cooking zones
that are not switched off. There is a
risk that the cooking zone could be
activated and the object heated.
Cooking zones and sensors

Automatic protection settings

The hob has a range of protection settings
that warn of danger and protect the appliance
from damage.
Residual heat display
During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
zone becomes hot. If you switch off the cook-
ing zone or the entire hob, the residual heat
symbol '
symbol on the heat setting display of a cook-
ing zone that is still hot.
If the temperature of the cooking zone falls
below a specific value, the residual heat sym-
bol '
Automatic reduction in performance
The temperature of the electronic elements
inside the hob are constantly monitored. If the
H
' will flash al-
heat increases too much, the hob is automat-
ically switched off.

Switching the hob off

• To switch the entire hob off, touch the on/
off sensor (9).
An acoustic signal will sound. All light dis-
plays, including the flashing residual heat
symbols 'H' will go out.
H
' will alternately flash with the '
H
' disappears.
8
88
8
Page EN-15
0
'
8
8
(9)

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis