Switching Off The Appliance; Automatic Safety Features; Safety Lock - hanseatic MC-IF7222H1CC Gebrauchsanleitung

Switching off the appliance

00
x x x x
ϱ
• To switch the entire appliance off, touch
the On/Off sensor (20).
You will hear a sound and all of the indica-
tor lights with the exception of the flashing
residual heat indicators "

Automatic safety features

The appliance has a range of safety features
that warn of danger and protect the appliance
from damage.
Residual heat display
During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
area becomes hot. If you switch off the cook-
ing area or the entire appliance, the residual
heat indicator " " will appear in the heat set-
H
ting display of a cooking area that is still hot.
Once the temperature of the cooking area
falls below a specific value, the residual heat
indicator " " will disappear.
H
Automatic power reduction
The temperature of the electronic elements
inside the appliance is constantly monitored.
Cooking areas and sensors
If the elements become too hot, the appliance
will automatically switch off.
x x x ϱ
(20)

Safety lock

Your appliance is equipped with a safety lock
which protects the appliance from inadvertent
or unauthorised use.
" will go out.
H
Activating the safety lock
• Touch the safety lock sensor (19).
lock before the next use.
Deactivating the safety lock
1. Ensure that the appliance is switched on.
2. Touch the safety lock sensor (19) for three
Lo
ϱ ^
u
(9)
" " appears in the display of the timer
Lo
sensor (9). All sensors except the On/Off
sensor are now locked.
The appliance can be switched off even
while the safety lock is activated. You
must, however, deactivate the safety
" " appears on the display of the timer
Lo
sensor (9).
seconds.
" " is replaced with "– –".
Lo
Now you can use all of the sensors on the
appliance again.
Page EN-17
^ ϱ
u
(19)