Inhaltsverzeichnis
Werbung
furniture require heat-resistant adhesive (100
°C). If the adhesive and surfaces are not
heat-resistant, the covering may warp and
come loose.
– An intermediate shelf is required if a drawer
is to be installed below the oven.
– The installation recess must have the follow-
ing minimum dimensions:
g g
Installation in an upright cabinet
Built-in oven with digital timer 65M90D0-E11319G
Installation under a worktop
5 7 0
All dimensions in mm
Connecting the oven
Depending on the installation recess, the oven
must be connected before or after installation.
– For the electrical connection of the oven, a
professional must install an earthed power
socket with a separate fuse with sufficient
protection (220–240 V~/50 Hz/16 A).
– The socket must be installed in way that
does not affect the depth of the installation
recess when the oven is plugged in.
– Do not use multi-plugs or extension cables.
1. Switch off the socket for the Oven before in-
stallation. To do this, unscrew and/or switch
off the fuse for the socket.
2. Set all oven switches to zero.
3. Insert the mains plug into the socket.
Preparation
G B - 1 3
Werbung
Inhaltsverzeichnis
