Inhaltsverzeichnis
Werbung
Operation
88 88
13 07
A
A
The hour indicator for the current time will
flash, as well as the indicator
4. Now use the 10 and 13 buttons to set the
hour for the desired end time.
5. Press the
11 button again.
6. Now use the 10 and 13 buttons to set the
minute for the desired end time.
7. Use the left toggle switch 9 to set the de-
sired cooking or baking function, and the
right toggle switch 14 to set the desired tem-
perature.
The cooking process will start. Once the
desired end time has been reached, the ap-
pliance will automatically switch to standby
mode. An acoustic signal will sound, and the
indicator
16 will flash.
A
Setting a cooking and end time
1. Set the desired cooking time as described in
steps 1-6 under "Setting a cooking time".
2. Then press the
11 button.
13 57
88 88
A
A
The display will show the current time; the
16 indicator will light up.
3. Briefly press the
11 button again several
times until the display shows the "
cator.
4. Now set the desired end time as described in
steps 2-6 under "Setting an end time".
5. Press the
11 button.
The appliance will switch to standby mode;
the display will show the current time, and
the
16 indicator will light up.
A
6. Use the left toggle switch 9 to set the desired
cooking or baking function, and the right tog-
gle switch 14 to set the desired temperature.
The appliance will start automatically at the
Built-in oven with digital timer 65M90D0-E11319G
G B - 2 6
time corresponding to the specified end time
minus the desired cooking time. Once the
set cooking time has elapsed, it will automat-
ically switch to standby mode.
An acoustic signal will sound, and the indica-
tor
A
16.
Example:
A
It is now 9:00 AM. You would like to have a dish
ready at 1:00 PM; it takes 45 minutes to cook.
• Follow steps 1-6 as described.
At 12:15 PM, the appliance will automati-
cally switch on; at 1:00 PM, it will automati-
cally return to standby mode.
Use the appliance as a kitchen
alarm clock (timer)
1. Press the
seconds.
The power indicator
display.
2. Briefly press the
timer indicator
3. Press the 10 or 13 button to enter system
setting mode.
4. Set the desired length of time as described
in steps 4-6 under "Setting a cooking time".
5. Briefly press the
A
A
A
The display will now show the current time
as well as the status indicator
er
" indi-
End
When the specified time runs out, an audible
signal will sound and the timer display
will flash.
switch to standby mode. To put it into
standby mode, press the
13 buttons simultaneously for ap-
proximately 3 seconds.
16 will flash.
11 button for approximately 3
17will appear on the
11 button again until the
18 flashes on the display.
11 button again.
14 45
88 88
18.
Please note!
Following the set time, the ap-
pliance will not automatically
17 and tim-
18
11 and
Werbung
Inhaltsverzeichnis
