Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Page EN-16
Cooking zones/mixed zones and sensors
The heat setting display will return to the
originally selected heat setting display after
approx. 5 minutes.
3. In order to deactivate the booster function
early, touch the sensor for the cooking
zone/mixed zone for which you wish to
deactivate the booster function.
4. Touch the boost sensor (13).
"b" will disappear from the heat setting
display next to the selected cooking zone/
mixed zone and the original heat setting
will once more be displayed.
Switching off individual
cooking zones/mixed zones
1. Touch the sensor of the cooking zone/
mixed zone that you would like to switch
off.
2. Touch the slider sensor (14) at the left
end or swipe your finger left over the slid-
er sensor until the heat setting display "0"
appears.
After a few seconds the heat setting dis-
play changes to "H" or "– –".
CAUTION
Risk of burns!
Always switch off a cooking zone/
■
mixed zone using the sensors only;
never by removing the cookware from
the cooking zone/mixed zone. Other-
wise, the cooking zone/mixed zone
will be reactivated as soon as a pot or
other object made of ferromagnetic
metal is placed on top.
Do
not
place
■
cooking zones/mixed zones that are
not switched off. There is a risk that
the cooking zone/mixed zone could
be activated and the object heated.
Automatic protection settings
The hob has a range of protection settings
that warn of danger and protect the appliance
from damage.
Residual heat display
During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
zone/mixed zone becomes hot. If you switch
off the cooking zone/mixed zone or the entire
hob, the residual heat symbol "
the heat setting display of a cooking zone/
mixed zone that is still hot.
If the temperature of the cooking zone/mixed
zone falls below a specific value, the residual
heat symbol "
Automatic reduction in performance
The temperature of the electronic elements
inside the hob are constantly monitored. If the
heat increases too much, the hob is automat-
ically switched off.
Switching the hob off
--
• To switch the entire hob off, touch the on/
objects
on
" disappears.
H
-
-
H
off sensor (11).
An acoustic signal will sound. All light dis-
plays, including the flashing residual heat
symbols 'H' will go out.
" appears in
H
-
(11)
-
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
