Inhaltsverzeichnis
Werbung
Final preparations
Removing transport locks
1. Remove any polystyrene, cardboard and
plastic safety parts from the oven and sides
of the baking trays.
2. Remove all blue protective films.
To operate the toggle switches,
The toggle switches 9 and 16 are retractable.
When pushed in they are level with the control
panel.
To operate the toggle switches,
• tap the middle of the toggle switch.
To hide it again, push it in.
Setting the time
Set the clock:
– if the oven has been newly connected;
– after a power failure.
If the oven has been newly connected, or after a
power failure, the display will show the following:
12 30
88 88
A
A
Built-in oven with digital timer 65M90D0-E11319G
How to set the clock:
88 88
12 30
A
10 11 13
1. Press the
10button or the
several times if necessary, to set the hour.
2. Now press the
11 button.
88 88
8 30
A
10 11 13
The minute indicator will start to flash.
1. Press the
10 button or the
several times if necessary, to set the minute.
2. Press the
11 button again.
The indicator stops flashing; the time has
been set.
The appliance is now in standby mode.
Please note!
After a power failure (or when
you pull out the plug) you will
need to reset the time.
You likewise have to manually
change the time from CET to CEST
(summer time) and vice versa.
Switching the appliance on and
switching to standby mode
88 88
8 30
A
11
The display will show this image in standby
mode.
• To switch on the appliance, press the
button for approximately 3 seconds.
Preparation
13 button,
13 button,
13
11
G B - 1 5
Werbung
Inhaltsverzeichnis
