Residual Heat Display; Operating Time Limit; Automatic Reduction In Performanceen; Safety Locking Mechanism - hanseatic MC-IF724H1B3C Gebrauchsanleitung

Residual heat display

During cooking, the heat from the pot is trans-
ferred to the glass ceramic and the cooking
zone/area becomes hot. If you switch off the
cooking zone/area or the entire hob, the re-
H
sidual heat symbol " " appears in the heat
setting display of a cooking zone/area that is
still hot.
If the temperature of the cooking zone/area
falls below a specific value, the residual heat
H
symbol " " disappears.

Operating time limit

Each cooking zone/area is provided with an
operating time limit. If the heat setting is not
changed for a prolonged period of time, the
cooking zone/area is automatically switched
off and the residual heat indicator '
vated.
The maximum operating time is set in accord-
ance with the most recently selected heat set-
ting.
Heat setting Maximum operating time
1, 2, 3
4, 5, 6
7, 8, 9
Automatic reduction in
performance
The temperature of the electronic elements
inside the hob is constantly monitored. If the
heat increases too much, the hob is automat-
ically switched off.
Cooking zones and sensors
H
' is acti-
8 hours
4 hours
2 hours

Safety locking mechanism

Your hob is equipped with a safety locking
mechanism, which guards against accidental
or unauthorised use of the hob.
88
Timer
(8)
To
• activate the safety locking mechanism,
simultaneously touch the timer sensors
(8) '–' and '+' until the timer sensor display
' Lo ' appears. All sensors except the On/
Off sensor are now locked.
• deactivate the safety locking mechanism,
simultaneously touch the timer sensors
(8) '–' and '+' until the display '
pears.
The hob can also be switched off while
the safety locking mechanism is activat-
ed. You must, however, deactivate the
safety locking mechanism before the next
use.
Page EN-15
Lo
' disap-