Final Assembly Of The Model Airplane; Assembly Of The Wings - Reely Sky Hawk 2.0 Bedienungsanleitung

11. Final Assembly of the Model Airplane

Before starting with the assembly of the model, you should ensure an appropriate surface
In order to attain excellent airplane performances, your model is manufactured with a light plastic foam. However, this
is very sensitive. Small mistakes during assembly of the model quickly lead to unsightly bumps or even holes in the
surface. Therefore, handle the model with care.
a) Assembly of the wings
• Put both wing halves flush together (1) and then attach
the top wing connection element (2).
• Then turn the wings around so that the top side faces
downwards and then attach the bottom wing connection
element (3) according to the illustration.
Make sure that the borings fort he attachment screws
are flush with each other.
• Now screw the bottom wing connection element togeth-
er with the top element using the enclosed 2.6 x 8 mm
attachment screws (4).
42
Figure 6