Towing The Vehicle - Kärcher MC 130 Plus Bedienungsanleitung

Securing the vehicle
WARNING
Danger of accident
Secure the vehicle against slipping during transport.
1. Park the vehicle.
2. Secure the vehicle with lashing straps on both sides at the il-
lustrated lashing points.
Note
If the vehicle with waste container is loaded in reverse for trans-
port, the cover of the waste container must be additionally se-
cured with a strap to prevent it from opening.

Towing the vehicle

Fitting the towing eye
Note
The towing eye with retaining pin and locking pin are located in a
storage compartment under the passenger seat.
Towing eye
1
Retaining pins
2
Locking pin
3
Locking pin for bolt
4
Bolt
5
1. Open the storage compartment under the passenger seat and
remove the towing eye.
Retaining pin with split pin
1
Towing eye
2
Vehicle chassis
3
Bolt
4
Locking pin
5
2. Attach the towing eye at the front of the vehicle chassis on the
right-hand side.
3. Insert the retaining pin into the towing eye and secure with the
locking pin.
Note
The towing hook for MC 130 advanced is stored behind the pas-
senger seat on a special holder along with the safety bolts and
safety bracket.
Towing eye
1
Safety bolt with safety bracket
2
Safety chain with safety bracket
3
Towing bolt
4
Holder for towing eye
5
Attached behind the passenger seat
1. Remove the towing eye with locking pin and safety bracket
from the holder.
English
Fitting the towing eye
99