Front Power Lift (Option) - Kärcher MC 130 Plus Bedienungsanleitung

2. Attach the sweeper system to the vehicle in the reverse se-
quence.
3. Lock the sweeper system (lever down).
4. Check the locking, see chapter Checking adjusting the attach-
ment locking mechanism.
5. Depressurise the hydraulic system. See chapter Depressur-
ise the hydraulic system (pressure relief).
6. Connect the hydraulic hoses to the couplings.

Front power lift (option)

Various different attachment devices can be attached to the front
power lifter using a 3-point mounting.
A changing carriage is required for attaching/removing the front
power lift.
Note
Optional accessory, order no. 2.852-067.0.
Installing the front power lift
1. Stop the vehicle on level, solid ground and secure it against
rolling away.
Locking lever
1
Vehicle mounting frame
2
Front power lift mounting
3
2. Move the locking lever upwards.
3. Use the lift truck to position the front power lift centrally in front
of the vehicle.
4. Insert the front power lift into the mounting frame on the vehi-
cle, all the way to the end stop.
92
Locking lever
1
5. Move the locking lever downwards.
6. Check the locking, see chapter Checking adjusting the attach-
ment locking mechanism.
7. Lower and retract the lift truck.
8. Depressurise the hydraulic system. See chapter Depressur-
ise the hydraulic system (pressure relief).
9. Connect the hydraulic hoses to the couplings.
Removing the front power lift
1. Raise the front power lift.
Changing carriage mounting
1
Front power lift frame
2
2. Use a lift truck to move the changing carriage under the front
power lift.
a Raise the lift truck.
b Make sure that the frame of the front power lift is securely
seated in the mounting of the removable frame.
3. Depressurise the front hydraulic system (pressure relief).
4. Release the hydraulic hoses.
a Fasten the hydraulic hoses to the front power lift with cable
ties.
5. Open the lock on both sides of the vehicle, see chapter "Open-
ing/closing the lock".
English