Sharp VC-2300G Serviceanleitung Seite 35

REMOVAL OF MAJOR PARTS
Screw to -3) Screw to
secure the secure the
front front
cabinet cabinet
(1) Two screws to secure
the cassette cover
Figure 37.
@ Removal of Front Cabinet
(@) Remove two screws from the cassette cover.
® Shift the cassette cover upwards to remove.
Note:
Keep the cassette housing up when removing the caset-
te cover.
@) Remove six screws from the front cabinet, then the
front cabinet can be detached.
Mechanical
control P.W.B. r F
Two tabs to
secure the
mechanical
contro! P.W.B.
Two screws to-.secure
the Y/C P.W.B.
Figure 39.
© Access to Y/C P.W.B.
@ Remove two screws from the Y/C P.W.B. Then the Y/
C P.W.B. can be opened as shown.
© Access to Mechanical Control P.W.B.
@ Remove two tabs from the mechanical control P.W.B.
Then the mechanical control P.W.B. can be opened as
shown.
Four screws
to secure the
back panel
Four screws to secure
the front cabinet
Figure 38.
e@ Removal of Back Panel
@ Remove AC adaptor.
© Remove four screws from the back panel, then the
back panel can be detached.
Three screws to secure
the operation frame
Two tabs to
secure the
timer/memory
control P.W B
Figure 40.
@ Removal of Power P.W.B.
@ Remove three screws from the operation frame, then
take the power P.W.B. off.
@ Removal of Timer/Memory Control P.W.B.
@ Remove two tabs from the timer/memory control
P.W.B. Then detach the timer/memory control P.W.B.
Figure 41.
@ Removal of AC Adaptor
@ Remove four screws at the bottom.
Figure 42.
@ Remove one screw, then detach the AC adaptor.