weinor Sottezza II Stretch/LED Austauschanleitung Seite 41

12. Use the overhanging tensioning rope ends
to tie a knot before and after the rope clamp
and wind the tensioning rope ends into
loops. These should not be longer than 15
cm and are fixed to the tensioned rope
between the rope clamp and the spring
using cable ties.
CAUTION:
The unit is now tensioned!
The running of the tensioning rope must be
checked.
Note:
The tensioning rope should not get stuck
between the projection profile (1) and the
projection profile cover (2).
Sottezza II Stretch/ LED/ Sottezza II OptiStretch/ LED
Technische Änderungen vorbehalten/ Technische wijzigingen voorbehouden/
We reserve the right to make technical changes/ Sous réserve de modifications techniques
Version/ Versie 1 13.01.2021
Artikelnummer/ Item
Number/ Numéro d'article 127266-0000 Page 41/55
Seite
Bladzijde