Scope Of Delivery; Intended Use - Scheppach Therbio Originalbetriebsanleitung

Introduction
MANUFACTURER:
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
DEAR CUSTOMER,
we hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified,
• A breakdown of the electrical system that occurs due
to the non-compliance of the electric regulations and
VDE regulations 0100, DIN 57113 / VDE0113.
Recommendations:
Read the entire text of the operating instructions prior
to the assembly and operation of the device. These
operating instructions are intended to make it easier
for you to get familiar with your device and utilize its
intended possibilities of use. The operating instructions
contain important notes on how to work safely, properly
and economically with your machine and how to avoid
dangers, save repair costs, reduce downtime, and
increase the reliability and working life of the machine.
In addition to the safety regulations contained herein,
you must in any case comply with the applicable regu-
lations of your country with respect to the operation of
the machine. Put the operating instructions in a clear
plastic folder to protect them from dirt and humidity, and
store them near the machine. The instructions must be
read and carefully observed by each operator prior to
starting the work. Only persons who have been trained
in the use of the machine and have been informed on
the related dangers and risks are allowed to use the
machine. The required minimum age must be met. In
addition to the safety notes contained in the present op-
erating instructions and the special regulations of your
country, the generally recognized technical rules for the
operation of machines must be observed.
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58  www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
Device description (Fig. 1-9)
1. Weed killer
2. Transport wheels
3. Mains plug
4. Sealing cap
5. Compression fitting
6. Handle
7. Actuation lever
8. Locking button
9. Lance
10. Nozzle
11. Extension cable (not supplied)
12. Operating panel
13. Lance holder
14. ON/OFF button
15. Operation LED
16. Water shortage warning LED
17. Temperature indicator
18. Charge status indicator
19. Pump button
20. Pump operation LED
21. Heating button
22. Heating mode LED
23. Battery
24. Battery cover
25. Hose

Scope of delivery

• Open the packaging and take out the equipment
with care.
• Remove the packaging material and any packag-
ing and/or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for trans-
port damage.
• If possible, please keep the packaging until the
end of the guarantee period.
m IMPORTANT!
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of swal-
lowing or suffocating!
• Original Operating Manual
• Weed killer (1)
• 2 x compression fitting (5)
• Handle (6)

Intended use

The weed killer is used for weed and moss control in
joints and for use in vegetable and kitchen gardens.
The hot water destroys the cellular structure of weeds
all the way into the root, which causes it to die. Fur-
thermore, the machine can be used for watering plants
with cold water, for spreading fungicides, pesticides,
herbicides, fertilisers or detergents which are soluble
in cold or warm water, as well as for disinfecting and
cleaning dirt and stains using hot water.
Only ever use the machine for its intended purpose.
Every use beyond that is deemed as not intended. The
user/operator, and not the manufacturer, is liable for
damage or injury of any kind caused by use other than
that intended.
Complying with the safety instructions as well as the
assembly manual and operating instructions in the op-
erating manual is also part of the intended use. People
operating and maintaining the machine must be famil-
iar with it and trained in terms of potential risks.
15 І 36