probst EASYFILL EF-H Betriebsanleitung Seite 58

Operation
• By turning the handle on the spindle (1), the brushes
should be lowered down, so they barely are touching the
surface of the pavement.
• Then lock the spindle (1) in the lock (4) in order to avoid
that the spindles are turning themselves and the brushes
are lowered down too much (high wear on brushes)!
• If the sand should be flushed in with water, connect a
water hose to the water tap (5) and dose the water by
opening and closing the water tap.
• When work is stopped, the water can be stopped by
closing the water tap (5)
The desired speed of the rotating brushes and also the
•
forward drive can be adjusted by the throttle (see ➔).
= maximum: 3200 min
= minimum: 1500 min
To stop the engine, the throttle has to be moved
•
completely to the rear position (6).
51700003
-1
-1
10 / 17 GB