Scope Of Delivery; Proper Use; Safety Information - Scheppach HS110 Serie Original Bedienungsanleitung

4. Scope of delivery

• Saw table with pre-mounted saw blade 1x
• Saw blade guard (2)
• Riving knife (3)
• Parallel stop (14)
• Stop rail (30)
• Transverse stop (31)
• Table width extension (6)
• Push stick (17)
• Legs (19)
• Centre struts (20a & 20b)
• Rubber feet (21)
• Stand (22)
• Table supports (24)
• Operating manual
• Hexagonal bolt with cross slot with
mounted washer / spring washer (a)
• Coach bolt (b)
• Washer (c)
• Spring washer (d)
• Nuts (e)
• Ring spanner, size 10/22 (f)
• Open-ended spanner, size 10 (g)
• Allen key HX 6 (h)
• Hexagonal bolts (k)

5. Proper use

The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of
all types of timbers, in accordance with the machine
size. It is not permitted to cut any type of round timber.
The machine may only be used in the intended man-
ner. Any use beyond this is improper. The user/opera-
tor, not the manufacturer, is responsible for damages
or injuries of any type resulting from this.
Only suitable saw blades (HM or CV saw blades) may
be used for the machine. The use of HSS saw blades
and any type of cutting wheels is prohibited.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed about
potential dangers. In addition, the applicable accident
prevention regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
1x m ATTENTION
1x When using equipment, several safety warnings must
1x be observed to prevent injuries and damage. For this
1x reason, please carefully read this operating manual /
1x safety instructions. Keep them in a safe place so that
2x the information is available at all times. If the device is
1x handed over to another person, hand over the operat-
4x ing and safety instructions with it. We accept no liabil-
4x ity for accidents or damage that occur due to a failure
4x to observe this manual and the safety instructions.
2x
4x The liability of the manufacturer and resulting dam-
1x ages are excluded in the event of modifications of the
machine.
16x
12x Despite use as intended, specific risk factors cannot
28x be entirely eliminated. Due to the design and layout of
28x the machine, the following risks remain:
28x • Contact with the saw blade in the exposed sawing
1x area.
1x • Reaching into the running saw blade (cutting injury)
1x • Kick-back of workpieces and workpiece parts
2x • Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing pro-
tection is not used.
• Harmful emissions of wood dusts during use in en-
closed areas.
Please observe that our equipment was not designed
with the intention of use for commercial or industrial
purposes. We assume no guarantee if the equipment
is used in commercial or industrial applications, or for
equivalent work.

6. Safety information

General power tool safety warnings
m WARNING: Read all safety warnings, instruc-
tions, illustrations and specifications provided
with this electric tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
www.scheppach.com GB | 31