Scope Of Delivery; Intended Use - Scheppach 5901312901 Original Bedienungsanleitung

32. Sight glass
32a. Screw on the sight glass
33. Laser
34. Laser switch
35. Screw for battery compartment
36. Battery cover

4. Scope of delivery

• Saw table with pre-mounted saw blade, 24 teeth
• Saw blade guard
• Riving knife
• Parallel stop
• Stop rail
• Transverse stop
• Table width extension (2x)
• Push stick
• Legs (4x)
• Centre struts (4x)
• Rubber feet (4x)
• Stand bracket (2x)
• Table supports (4x)
• Batteries 1,5V AAA (2x)
• Operating manual
• Hexagonal bolt with cross slot with mounted
U-washer/spring washer, 16 units (a)
• Carriage bolt, 19 units (b)
• Washer, 27 units (c)
• Spring washer, 20 units (d)
• Nuts, 27 units (e)
• Ring spanner, size 10/22 (f)
• Open-ended spanner, size 10 (g)
• Allen key HX 6 (h)
• Hexagonal bolts (k)

5. Intended use

The circular table saw is used for the longitudinal and
transverse cutting (only with the transverse stop) of
all types of timbers, in accordance with the machine
size. It is not permitted to cut any type of round timber.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a case
of misuse. The user/operator and not the manufactur-
er will be liable for any damage or injuries of any kind
resulting from such misuse.
The machine is to be operated only with suitable saw
blades. (HM or CV saw blades). The use of any type of
HSS saw blades and cutting discs is prohibited.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the machine must
be familiar with the manual and must be informed about
potential dangers. In addition, the applicable accident
prevention regulations must be strictly observed.
Other general occupational health and safety-related
rules and regulations must be observed.
m IMPORTANT
When using the equipment, a few safety precau-
tions must be observed to avoid injuries and damage.
Please read the complete operating instructions and
safety regulations with due care.
Keep this manual in a safe place, so that the informa-
tion is available at all times. If you give the equipment
to any other person, hand over these operating instruc-
tions and safety regulations as well. We cannot accept
any liability for damage or accidents which arise due
to a failure to follow these instructions and the safety
instructions.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Despite use as intended, specific risk factors cannot
be entirely eliminated. Due to the design and layout of
the machine, the following risks remain:
• Contact with the saw blade in the exposed sawing
area
• Reaching into the running saw blade (cutting injury)
• Kick-back of workpieces and workpiece parts
• Saw blade breakage
• Ejection of faulty carbide parts of the saw blade
• Hearing damage when the necessary hearing pro-
tection is not used
• Harmful emissions of wood dusts during use in en-
closed areas
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the equipment is used in
commercial, trade or industrial businesses or for equiv-
alent purposes.
www.scheppach.com GB | 33