Starting From The Main Display, Press The Left Push Button Rotary Encoder To Access The Menu; Rotate Encoder = Set Brightness (Dim); Press Encoder = Select Operating Mode (Mode) - Cameo P2 FC Bedienungsanleitung

STANDALONE MODE PLAY LOOP(8-step colour sequences 1–8)
Starting from the main display, press the left push button rotary encoder to access the menu for
selecting the mode. Rotate the left encoder (SELECT) to SELECT Play Loop (see left arrow) and
confirm by pressing the left encoder (ENTER). Now select one of the 8 pre-programmed but indi-
vidually editable colour sequences by turning the left encoder. Confirm your selection by pressing
the left encoder (ENTER). The brightness (DIM) of the colour sequence is now set using the left
encoder, the step duration (t-Step, 0.1 seconds to 21 minutes and 2 random modes) and the fade
time (t-Fade, 0 seconds to 18 minutes and 2 random modes) using the middle and right encoders
(see illustration). The individual settings and renaming of the colour sequences can be done in the
Edit Loop menu item in the main menu.
Rotate encoder =
set brightness (DIM)
Press encoder =
select operating mode (Mode)
EDIT LOOP (Edit Loop)
Starting from the main display, press the right rotary-push encoder to enter the main menu. Turn
the left encoder (SELECT) to choose the Edit Loop menu item (as indicated by the selection arrow
on the left) and confirm by pressing the left encoder (ENTER). Now you can select one of the 8
colour sequences by turning the left encoder and confirming the selection by pressing the left
encoder (ENTER).
Edit Loop
LOOP_1
LOOP_2
BAVARIAN
TV SIMULATION
DISCO SIMULATION
FIRE SIMULATION
WARNING LIGHTS
TRAFFIC FLASH
Menu
Now give the colour sequence an individual name, up to 12 characters long (Edit Loop Name),
by turning the left encoder to select a letter, underscore or number for the first character of the
name and confirm by pressing the left encoder. This is followed by the input for the second digit
and so on. When the name is complete, press the middle encoder (Save&Next) to go to the next
processing step. If you press "Save&Next" before selecting a letter, underscore or number for the
20
Play Loop | Auto
DIM t-Step t-Fade
100% 4s 3s
Mode Back Menu
Rotate encoder =
set step time (t-step)
Press encoder =
back to loop selection
Rotate encoder =
Set fade time (t-fade)
Press encoder =
open main menu