Cameo P2 FC Bedienungsanleitung Seite 19

Now give the preset an individual name, up to 12 characters long (Edit user Colour Name), by
turning the left encoder to select a letter, underscore or number for the first character of the
name and confirm by pressing the left encoder. This is followed by the input for the second digit
and so on. When the name is complete, press the middle encoder (Save&Next) to go to the next
processing step. If you press "Save&Next" before selecting a letter, underscore or number for the
first digit, the previous preset name will be retained and you will immediately be taken to the next
processing step.
Edit User Colour Name
A
...
Z
_
0
...
9
Save&Next ESC
Now decide how you want to create the colour for the preset, choose between the 4 methods
CCT, HSI, DIRECT and GEL by turning the left encoder (SELECT) and confirm by pressing the left
encoder (ENTER).
Edit User Colour
Set Colour Via CCT
Set Colour Via HSI
Set Colour Via DIRECT
Set Colour Via GEL
Now set the desired colour, as described in the instructions for the respective standalone mode,
and press the left encoder (ENTER/Save) to confirm.
Edit User Colour Via CCT
DIM CCT Tint
100% 3000K 0.0
Save Menu
Edit User Colour Via HSI
DIM HUE SAT
100% 360 100
Save Menu
Edit User Colour Via DIRECT
DIM R G
100% 255 255
Save Color Menu
Edit User Colour Via GEL
DIM GEL
100% Plasa Red
Save Menu
19