Cameo P2 FC Bedienungsanleitung Seite 17

STANDALONE MODE DIRECT LED (RGBAL colour mixing)
Starting from the main display, press the left push button rotary encoder to access the menu for
selecting the mode. Turn the left encoder (SELECT) to choose DIRECT LED (see left arrow) and
confirm by pressing the left encoder (ENTER). Now adjust the overall brightness (DIM) and the
intensity of R, G, B, A and L, and strobe effect (Strobe) using the three rotary-push encoders (see
illustration).
Rotate encoder =
set brightness (DIM)
Press encoder =
select operating mode (Mode)
STANDALONE MODE GEL (colour filter presets)
Starting from the main display, press the left push button rotary encoder to access the menu
for selecting the mode. Turn the left encoder (SELECT) to choose GEL mode (see left arrow) and
confirm by pressing the left encoder (ENTER). Now set the brightness (DIM) and colour filter preset
(GEL) using the left and middle rotary-push encoder (see illustration). The colour filter presets with
the Lee filter designations and the corresponding Rosco filter numbers can be found in the DMX
tables under DMX CONTROL (18-channel mode, channel 16 "Colour Presets" without "User Colour
1-8").
Rotate encoder =
set brightness (DIM)
Press encoder =
select operating mode (Mode)
DIRECT LED | Auto
DIM R G
100% 255 255
Mode Colour Menu
Rotate encoder =
set brightness of R or B or L
Press encoder =
toggle between R+G and B+A and L+Strobe (Colour)
GEL | Auto
DIM GEL
100% Plasa Red
Mode Menu
Rotate Encoder =
select filter preset
Rotate encoder =
adjust brightness of G or An
or strobe
Press encoder =
open main menu (menu)
Press encoder =
open main menu
17