Cameo P2 FC Bedienungsanleitung Seite 23

Display = Display lighting
Off Timer
Signal = Operating status
Fail on control signal
interruption
Dimmer = Dimmer curve
Curve
Dimmer = Dimmer response
Re-
sponse
Red Shift = accurately mimics
the colour drift of
dimming a halogen
spotlight. When dim-
ming the spotlight,
the colour tem-
perature changes
automatically to
increasingly warm
white and amber
(and vice versa).
PWM = LED PWM frequency 800 Hz,
Frequen-
cy
Always On permanently on
Off after Deactivates after approximately 20 seconds of
20 s inactivity
Hold Last command is retained
Blackout Activates blackout
User_Co- User_Colour_8
lour_8
Fade Out 10-second fade to blackout
10 s
Linear Light intensity increases linearly with DMX
value
Exponential Light intensity can be finely adjusted at lower
DMX values and broadly adjusted at higher
DMX values
Logarith- Light intensity can be broadly adjusted at low-
mic er DMX values and finely adjusted at higher
DMX values
S-curve Light intensity can be finely adjusted at lower
and higher DMX values and broadly adjusted
at medium DMX values
LED Lamp responds abruptly to changes in DMX
value
Halogen Light behaves like a halogen spotlight with
slight brightness changes
Off Colour drift is disabled
Dim to Colour drift is enabled
Warm
Configuration of LED PWM frequency
1200 Hz,
2000 Hz,
3600 Hz,
12 kHz,
18.9 kHz,
25 kHz
23