Cameo P2 FC Bedienungsanleitung Seite 27

light projection, loosen the knurled screws slightly and move the lens tube in its guide as required.
Tighten the knurled screws again after focusing.
REMOVAL OF LENS TUBE WITH ADJUSTABLE SHUTTER UNIT
PLEASE NOTE:
1. Do not operate the spotlight during the installation or removal of a tube.
2. Be careful not to damage or contaminate the lens behind when disassembling or assembling
the tube. Ensure that no foreign bodies enter the spotlight housing.
3. Do not operate the spotlight without the tube.
To remove the tube, first loosen the two knurled screws on the top and bottom of the spotlight
housing (A). Now turn the tube approximately one eighth of a turn counterclockwise (B) and
remove it from the spotlight housing (C) towards the front. To install the tube, proceed in reverse
order, making sure that the unit is correctly seated in the corresponding guides in the spotlight
housing.
A
A
B
A
B
B
C
27