Connections, Operating And Display Elements; Oled Display - Cameo PIXBAR G2 Bedienungsanleitung

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
7
3
- The CLPB400IPG2 and CLPB600IPG2 models feature
identical connections, operating and display elements -
1 POWER IN
IP65 mains input socket with rubber sealing cap (TRUE1 compatible). Operating voltage 100 - 240
VAC / 50 - 60 Hz. Connection via supplied power cable (when not in use, always close with rubber
sealing cap).
2 POWER OUT
IP65 mains output socket with rubber sealing cap (TRUE1 compatible). Facilitates power supply to
other CAMEO spotlights. Ensure that the total current consumption of all connected devices does
not exceed the value specified on the device in amperes (A) (when not in use, always close with
the rubber sealing cap).
3
DMX IN
Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console, when not in
use always
close with the rubber sealing cap).
4 DMX OUT
Female IP65 5-pin XLR socket for sending DMX control signal (when not in use, always close with
the rubber sealing cap).
5

OLED DISPLAY

The OLED display shows the currently activated operating mode or the current DMX address
(main display), the menu items in the menu and the numerical value or operating mode in certain
menu items.
5
6
2
8
4
13