Turn Encoder; Starting From The Main Display, Press The Left-Hand Rotary-Push Encoder To Access The Menu; Currently Activated Operating Mode; Fan Mode - Cameo F2 FC IP Bedienungsanleitung

Now decide in which way you want to create the colour for the preset, choose between the 4
methods CCT, HSI, DIRECT and GEL by turning the left encoder (SELECT) and confirm by pressing
the left encoder (ENTER).
Now set the desired colour as described in the instructions for the respective standalone mode
and press the left encoder (ENTER/Save) to confirm.
STANDALONE OPERATING MODE PLAY LOOP (8-step colour sequences 1–8)
Starting from the main display, press the left-hand rotary-push encoder to access the menu for
selecting the operating mode. Turn the left encoder (SELECT) to select the Play Loop mode (note
the selection arrow on the left) and confirm by pressing the left encoder (ENTER). Select one of
the 8 pre-programmed but individually editable colour sequences by turning the left encoder
again. Confirm the selection by pressing the left encoder (ENTER). Now set the brightness (DIM)
of the colour sequence using the left encoder, the step duration (0.1 seconds to 21 minutes and
2 random modes) and the fade time (0 seconds to 18 minutes and 2 random modes) using the
middle and right encoders (see illustration). The individual settings and renaming of the colour
sequences can be done in the menu item Edit Loop in the main menu.

currently activated operating mode

Turn encoder =

Set brightness (DIM)
Press encoder =
Selection of the operating mode
(Mode)
18
Turn encoder =
Set step duration (t-Step)
Press encoder =
back to colour sequence selection (Back)

Fan mode

Turn encoder =
Set fade time (t-fade)
Press encoder =
Open main menu (Menu)