Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
SYSTEM INFORMATION (System Info)
Starting from the main display, press the right rotary-push encoder to enter the main menu. Turn
the left encoder (SELECT) to choose menu item System Info (see left arrow) and confirm by
pressing the left encoder (ENTER). Rotate the left encoder to display the desired information (see
table).

System Info

Main CPU
Device firmware
LED temp.
Displays temperature in Celsius and Fahrenheit
Op. hours
Total operating time in hours and minutes
Display
Display shutdown activated/deactivated
Signal Fail
Operational status in the event of DMX signal interruption
Dim Curve
Dimmer curve
Dim Response
Dimmer response
Red Shift
Colour drift activated/deactivated
PWM.
LED PWM frequency
Calibr.
Calibration
User Cal. R
Cross-mode adjustment of red
User Cal. G
Cross-mode adjustment of green
User Cal. B
Cross-mode adjustment of blue
User Cal. A
Cross-mode adjustment of amber
User Cal. L
Cross-mode adjustment of lime
Autolock
Automatic locking of the operating elements is activated/deactivated
Fan
Fan setting
MANUAL LOCKING FUNCTION
In addition to the ability to automatically protect the lamp from accidental and unauthorised
operation (see Settings - Autolock), the operating elements can also be locked manually. Press
and hold the middle and right rotary-push encoders simultaneously for approx. 4 seconds. If an
attempt is made to change settings, "Locked!" will appear in the display, and changing the spot-
light's settings via the encoder is no longer possible. After approx. 1 minute, the current operating
mode is displayed again. To release the lock, press and hold the middle and right rotary-push
encoders simultaneously for approx. 4 seconds. The display will show the previously displayed
information.
PLEASE NOTE
In order to be able to access all menu items in the spotlight via the Fixture menu using the Cameo
UNICON DMX/RDM controller, the menu items Stand Alone (with all Stand Alone modes), EZ
Remote and Slave are also in the main menu, except in the Mode menu.
25

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clp2fc

Inhaltsverzeichnis