Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 38
3
FUSE
Fuse holder for 5 x 20 mm fuses. IMPORTANT: Replace the fuse only with a fuse of the same type
and value. In the event of repeated fuse failure, please contact an authorised service centre.
4
DMX IN
Male 5-pin XLR socket for connection to a DMX control device (e.g. DMX console).
5
DMX OUT
Female 5-pin XLR socket for sending the DMX control signal.
6
IDMX STICK
Connection for the optional iDMX stick for W-DMX™ connection (plug in the iDMX stick with the
antenna facing upwards).
7

OLED DISPLAY

The OLED display shows the currently activated mode (main display), the menu items in the menu
and the numerical value or operational status in certain menu items. If there is no input for around
two minutes, the display automatically returns to the main display. Note regarding the main
display in operating modes with external control: As soon as the control signal is interrupted, the
characters in the display begin to flash. When there is a control signal again, the flashing stops.
8
DIM / ENTER / SELECT
Rotary-push encoder for the adjustment and control of the spotlight.
DIM - In the standalone modes CCT, HSI, DIRECT LED, GEL, User Colour and Play Loop, the encod-
er has the function of the master dimmer (rotate encoder).
ENTER - 1. Press ENTER to access the menu level to select the mode. 2. You move down one level
in the menu structure. 3. You can confirm a value or status or value change, such as changing the
DMX start address, by pressing ENTER.
SELECT - Turn the encoder to SELECT the menu items on the menu level and change the status
or a value in a menu item (e.g. DMX start address).
9
MIDDLE ENCODER
The function of the middle push-button rotary encoder (turn and press) is shown in the corre-
sponding menu item in the centre of the display (centre line = turn, bottom line = press).
10
ESC
If the press function of the right push button rotary encoder is not explicitly shown at the bottom
right of the display, pressing the encoder has the function of moving up one level in the menu
structure.
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Clp2fc

Inhaltsverzeichnis