Technical Data; Rating Plate; Software Licences - AEG IAE84883FB Benutzerinformation

Problem
You can hear a constant beep
noise.
Cookware heats up longer than 5
min.
9.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the

10. TECHNICAL DATA

10.1 Rating plate

Model IAE84883FB
Typ 62 D4A 01 CD
Induction 7.2 kW
Ser.Nr. .................
AEG

10.2 Software Licences

The software included in the hob contains
copyrighted software that is licensed under
the BSD, fontconfig, FTL, GPL-2.0,
LGPL-2.0, LGPL-2.1, libJpeg, zLib/ libpng,
MIT, OpenSSL / SSLEAY ISC, Apache 2.0
and others.
10.3 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Left front 2300
Left rear 2300
Middle front 1400
Right rear 2300
Possible cause
The electrical connection is incor‐
rect.
The bottom of the cookware is not
induction compatible.
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
PNC 949 597 769 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in: Germany
7.2 kW
Check the full copy of the licence in: Menu >
Settings > Service > License.
You can download the source code of the
open source software by following the
hyperlink present in the web product page.
PowerBoost [W]
3200
3200
2500
3600
Remedy
Disconnect the hob from the electri‐
cal supply. Ask a qualified electri‐
cian to check the installation.
Use cookware with correct (flat,
magnetic) bottom. Refer to "Hints
and tips".
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
10 125 - 210
10 125 - 210
4 125 - 145
10 205 - 240
ENGLISH 31