Technical Data; Rating Plate - AEG IPE84573FB Benutzerinformation

Problem
comes on.
and a number come on.
You can hear a constant beep
noise.
9.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Make sure, you
operated the hob correctly. If not the

10. TECHNICAL DATA

10.1 Rating plate

Model IPE84573FB
Typ 62 D4A 21 AD
Induction 7.2 kW
Ser.Nr. .................
AEG
10.2 Cooking zones specification
Cooking zone Nominal power
(maximum heat
setting) [W]
Middle rear 2300
Right front 1800
Flexible induction 2300
cooking area
22 ENGLISH
Possible cause
FlexiBridge (Flexible Bridge) oper‐
ates. One or more sections of the
function mode which operates are
not covered by the cookware.
PowerSlide operates. Two pots are
placed on the flexible induction
cooking area.
There is an error in the hob.
The electrical connection is incor‐
rect.
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The information about
guarantee period and Authorised Service
Centres are in the guarantee booklet.
PNC 949 597 536 00
220 - 240 V / 400 V 2N 50 - 60 Hz
Made in: Germany
7.2 kW
PowerBoost [W]
3200
2800
3200
Remedy
Place the cookware on the correct
number of sections of the function
mode which operates or change the
function mode. Refer to "Flexible in‐
duction cooking area".
Use only one pot. Refer to "Flexible in‐
duction cooking area".
Deactivate the hob and activate it
again after 30 seconds. If
again, disconnect the hob from the
electrical supply. After 30 seconds,
connect the hob again. If the problem
continues, speak to an Authorised
Service Centre.
Disconnect the hob from the electrical
supply. Ask a qualified electrician to
check the installation.
PowerBoost Cookware diame‐
maximum dura‐ ter [mm]
tion [min]
10 125 - 210
10 145 - 180
10 minimum 100
comes on