Using The Cooking Zones; Powerboost; Countdown-Timer - AEG IAE84883FB Benutzerinformation

6.3 Using the cooking zones

Place the cookware in the centre of the
selected cooking zone. Induction cooking
zones adapt to the dimensions of the bottom
of the cookware automatically.
Once you place a pot on the selected
cooking zone the hob automatically detects it
and the relevant slider appears on the
display. The slider is visible for 8 seconds,
after that time the display goes back to the
main view. To close the slider faster tap the
screen outside of the slider area.
When other zones are active the heat setting
for the zone you want to use may be limited.
Refer to "Power Management".
Make sure that the pot is
suitable for induction hobs. For
more information on cookware
types refer to "Hints and tips".
Check the size of the pot in
"Technical data".
6.4 Heat setting
1. Activate the hob.
2. Place the pot on the selected cooking
zone.
The slider for the active cooking zone
appears on the display and is active for 8
seconds.
3. Touch or slide your finger to set the
desired heat setting.
The symbol turns red and becomes bigger.
You can also change the heat setting while
cooking. Touch the zone selection symbol on
the main view of the control panel and move
you finger to the left or right (to lower or
increase the heat setting).

6.5 PowerBoost

This function activates more power for the
appropriate induction cooking zone; it
depends on the cookware size. The function
can be activated only for a limited period of
time.
14 ENGLISH
1. Touch the desired zone symbol first.
2. Touch or slide your finger to the right
to activate the function for the chosen
cooking zone.
The symbol turns red and becomes bigger.
The function deactivates automatically. To
deactivate the function manually select the
zone and change its heat setting.
For maximum duration values,
refer to "Technical data".
6.6 OptiHeat Control(3 step
Residual heat indicator)
WARNING!
III / II / I As long as the indicator
is on, there is a risk of burns
from residual heat.
The induction cooking zones produce the
heat necessary for the cooking process
directly in the bottom of the cookware. The
glass ceramic is heated by the heat of the
cookware.
The indicators III / II / I appear when a
cooking zone is hot. They show the level of
the residual heat for the cooking zones you
are currently using.
The indicator may also appear:
• for the neighbouring cooking zones even
if you are not using them,
• when hot cookware is placed on a cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the cooking
zone has cooled down.
6.7 Timer
Count Down Timer
+STOP
Use this function to specify how long a
cooking zone should operate during a single
cooking session.
You can set the function for each cooking
zone separately.