Display Brightness; Power Management - AEG IAE84883FB Benutzerinformation

To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .

6.19 Display Brightness

You can change the brightness of the
display.
There are 4 brightness levels, 1 is the lowest
and 4 is the highest.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Display
Brightness from the list.
3. Choose the appropriate level.
To leave the Menu, touch
of the display, outside of the pop-up window.
To navigate through the Menu, use or .
6.20 Power limitation
Originally the appliance works at the highest
possible power level (7200 W). You can
change the maximum power if the installation
does not support the full power.
Make sure that the selected
power fits to the house
installation fuses.
If the power level is set to 1500
W, you cannot activate any
function from Assisted Cooking.
If the power level is lower than
7200 W, you cannot activate any
other cooking zone when
Assisted Cooking is running.
1. Touch on the display to open the
Menu.
2. Select Settings > Setup > Power
Management and choose the appropriate
power level between 1500 W and 7200
W.
To leave the Menu touch the right side of the
display, outside of the pop-up window, or
touch repeatedly.
20 ENGLISH
or the right side
or the right side

6.21 Power Management

• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3600 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3600 W.
• The function decreases the power of the
other cooking zones connected to the
same phase, which has an influence on
the available heat setting.
• The maximum heat setting is visible on
the slider. Only the digits in white are
active.
• If a higher heat setting is not available
reduce it for the other cooking zones first.
Power Management with Power limitation
function
When you set the Power limitation function to
6000 W or less, power of the hob is divided
between all cooking zones.
When you set the Power limitation function to
more than 6000 W, power of the hob is
divided between two cooking zones in a pair.