i) Support plates or large
workpieces in order to re-
duce the risk of kickback
from a jammed cutting
disc. Large workpieces may
bend under their own weight.
The workpiece must be suppor-
ted on both sides of the disc,
not only near the centre cut, but
also at the edge.
j) Beparticularlycarefulforpock-
et cuts in existing walls or other
areas where you cannot see
what is there. The cutting disc
may cause a kickback when
it cuts into gas or water lines,
electrical lines or other hidden
objects.
Additional safety
information
a) Approvedcuttingdisktypes:
segmented diamond disks with
a maximum space of 10 mm
between segments, only with a
negative cutting angle.
Disk diameter: 125 mm
Disk thickness: 2,1 mm
Warning! Always wear
ear protection.
RESIDUAL RISKS
Evenifproperlyoperatingand
handling this electric tool, some
residual risks will remain. Due to its
construction and build, this electric
tool may present the following haz-
ards:
a) Lungdamageifsuitablerespira-
tory protection is not worn.
b) Hearingdamageifsuitableear
protection is not worn.
c) Damagetohealthdueto
- touchingtheareaofthegrind-
ingtoolwhichisnotcovered;
- ejectionofpartsofworkpieces
or damaged grinding discs.
d) Healthinjurieswhichresultfrom
swinging hand and arm, in the
event that the device is used
over a longer period of time
or is not used and maintained
properly.
Warning! During opera-
tion, this electric tool gener-
atesanelectromagneticfield
which, under certain circum-
stances, may impair the func-
tionality of active or passive
medical implants. To reduce
the risk of serious or lethal
injuries, we recommend
that persons with medical
implants consult their doctor
and the manufacturer of their
medical implant before oper-
ating the machine.
Assembly
Caution!
Risk of injury!
-
Ensurethatyouhavesufficientspace
in which to work, and that you do not
endanger other people.
-
Allhoodsandprotectivedevicesmust
be assembled properly before commis-
sioning.
-
Disconnectthemainsplugbefore
changing the setting on the device.
GB
IE
33