Additional Safety Instructions For All Applications; Kickback And Corresponding Precautions - Parkside PMNF 1500 A1 Originalbetriebsanleitung

i)­ Wear personal safety
equipment. Depending on
the application, use full
face shields, eye protec-
tion or safety goggles. In
so far as it is appropriate,
wear dust masks, ear pro-
tection, gloves or special
aprons which keep small
grinding and material
particles away from you.
Eyes­should­be­protected­from­
the foreign matter which can be
caused­to­fly­during­the­various­
applications. Dust or breathing
masks­should­filter­the­dust­that­
is created during operation. If
you are exposed to loud noise
for a long time, you may suffer
hearing loss.
j)­ Ensure that other people
are at a safe distance to
your working area. Any-
one who enters the work-
ing area should wear
personal protective equip-
ment. Broken bits from the
piece being worked or broken
attachment­tools­can­fly­away­
and cause injuries even beyond
the direct working area.
k)­ Hold the electric tool only
by the insulated gripping
surfaces when performing
work in which the cutting
tool may come into contact
with hidden wiring or its
own cord. Contact with a live
wire can also cause a charge
in metal parts of the device and
result in an electric shock.
l)­ Keep the cord away from
the rotating attachment
tool. If you lose control of the
device, the power cord can
become separated or caught
and your hand or arm may be
pulled into the rotating attach-
ment tool.
m)­Never put the electric tool
down before the attach-
ment tool has come to a
full stop. The rotating attach-
ment tool can come into contact
with the surface upon which it
is set, whereby you could lose
control of the electric tool.
n)­ Never allow the electric
tool to run while you are
carrying it. Your clothing may
accidentally come into contact
with the rotating attachment tool
and get caught and the attach-
ment tool could drill into your
body.
o)­ Clean the ventilation slots
of your electric tool rou-
tinely. The motor air pulls dust
into the housing and, should too
much metallic dust collect, could
cause electrical hazards.
p)­ Never use the electric tool
near flammable material.
Sparks could ignite this material.
q)­ Do not use attachment
tools which require liquid
coolant. Using water or an-
other liquid coolant could lead
to electrical shock.
Additional safety instruc-
tions for all applications
Kickback and corresponding
precautions
Kickback is the sudden reaction
from a chopping or blocked grind-
GB IE
31