General description
Seethefold-outpagesfor
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
-
Device
-
2cuttingdisks(pre-mounted)
-
Vacuumadapter(pre-mounted)
-
Reducingadapterforvacuum
-
Chuckkey
-
Handchisel
-
Storagecase
-
Instructionsforuse
Functional description
The wall chaser cuts two grooves in brick-
work using two parallel diamond cutting
disks, without requiring the use of water.
Cabling grooves can be opened up by
removing the material in between the
grooves.
Please refer to the information from the
disc manufacturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Handgrip
2 On/off switch
3 Switch block
4 Auxiliary handle
5 Maintenancecoverage
6 Spindle stop button
7 Cutting disc
8 Start roller
9 Vacuum connector
10 Vacuum adapter
11 Hand chisel
12 Chuck key
13 Rotational direction marking
14 Protective guard opening
15 Mountingspindle
16 Threadedclampingflange
17 Retaining screw
18 Mountingflange
19 Spacer disks
20 Flange
Technical data
Wall chaser ............ PMNF 1500 A1
Rated input voltage ..........230 V~, 50 Hz
Connected load ........................ 1500 W
Idlespeed(n) ..........................9000 rpm
Dimension of the
cutting discs ............. Ø 125 x 22,23 mm
Groove depth ......................... 0-30mm
Groove width ................ 8 mm bis 26 mm
Spindle thread ................................ M14
Safety class ..........
Protection category..........................IP X0
Sound pressure level
) ...................... 94dB(A);K
(L
pA
Sound power level (L
measured ........... 105dB(A);K
)
Vibration (a
h
Handgrip .......... 6,1 m/s
Auxiliary handle ..7,5 m/s
The vibration values represent maximum
values which have been determined with
the supplied blade. The actual vibration
values may vary depending on the used
accessories.
The vibration values are still affected by the
handling for the user's.
GB
IE
II(Doubleinsulation)
= 3 dB
pA
)
WA
= 3 dB
WA
;K=1,5m/s
2
;K=1,5m/s
2
2
2
25