Ec Declaration Of Conformity - Optimum OPTigrind GZ 20C Betriebsanleitung

EC - Declaration of Conformity
Machinery Directive 2006/42/EC Annex II 1.A
The manufacturer /
retailer:
hereby declares that the following product,
Product designation:
Type designation:
Grinding machine for private user, as well as craft and industrial plants which meets all the relevant
provisions of the above mentioned Directive 2006/42/EC as well as the other directives applied (below)
including their amendments in force at the time of declaration.
The following other EU Directives have been applied: EMC Directive 2014/30/EC ; Restriction of the use of
certain hazardous substances in electrical and electronic equipment 2015/863/EU
The safety objective meet the requirement of EC Directive 2006/42/EC
The following harmonized standards were applied:
EN 62841-3-4:2020-09: Safety of transportable motor-operated electric tools - Particular requirements for
bench grinders, portable bench grinders which can be equipped with one or two insert tools as follows: -
grinding wheels form 1 according to ISO 603-4 with a diameter up to 310 mm and a thickness up to 55 mm;
- wire brushes with a diameter up to 310 mm and a thickness up to 55 mm; - polishing wheels with a
diameter up to 310 mm; and with a peripheral speed of any insert tools between 10 m/s and 50 m/s.
EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
EN 60204-1:2006/A1:2009
Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-
1:2005/A1:2008)
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk
reduction
Person responsible for the document: Kilian Stürmer,
Phone: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, Managing director)
Hallstadt, 2021-05-05
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt
Grinding machine
GZ20C | GZ25C | GZ20D | GZ20D GZ20CD | GZ25D |
GZ25CD | GZ25DD | GZ30D | GZ30DD
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt