Ec Declaration Of Conformity - Optimum OPTigrind GU 30S Betriebsanleitung

EC Declaration of Conformity

according to Machinery directive 2006/42/EC, Annex II 1.A
The manufacturer/
Distributor:
hereby declares that the following product
Product designation:
Type designation:
Universal bench grinder for private persons, as well as for craft and industrial plants which meets all the rel-
evant provisions of the above mentioned Directive 2006/42/EC as well as the other directives applied
(below) including their amendments in force at the time of declaration.
The following additional EU Directives have been applied: EMC Directive 2014/30/EU ; Restriction of the
use of certain hazardous substances in electrical and electronic equipment 2015/863/EU
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 62841-3-4:2020-09:
Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders,
portable bench grinders which can be equipped with one or two insert tools as follows: - grinding wheels
form 1 according to ISO 603-4 with a diameter up to 310 mm and a thickness up to 55 mm; - wire brushes
with a diameter up to 310 mm and a thickness up to 55 mm; - polishing wheels with a diameter up to 310
mm; and with a peripheral speed of any insert tools between 10 m/s and 50 m/s.
EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
EN 60204-1:2019-06 - Safety of machinery - Electrical equipment of machines - Part 1: General require-
ments
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
Responsible for documentation: Kilian Stürmer
Tel.: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, General Manager)
Hallstadt, 2021-03-09
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Universal grinding machine
GU30S
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
EN