Safety Devices - Optimum OPTigrind GZ 20C Betriebsanleitung

Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respective stan-
dards and regulations the electrical specialist is able to perform works on the electrical system and to recog-
nise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working and knows the
relevant standards and regulations.
Specialist staff
Due to his professional training, knowledge and experience as well as his knowledge of relevant regulations
the specialist staff is able to perform the assigned tasks and to recognise and avoid any possible dangers
himself.
Instructed persons
Instructed persons were instructed by the operating company about the assigned tasks and any possible
risks in case of improper behaviour.
INFORMATION
Everyone involved in the assembly, commissioning, operation and maintenance must

be duly qualified,

strictly follow these operating instructions.
In the event of improper use

there may be a risk to the staff,

there may be a risk to the grinding machine and other material values,

the correct function of the grinding machine may be affected.
1.6 Operator positions
The operator's position is in front of the grinding machine.
1.7 Safety measures during operation
CAUTION!
Risk due to inhaling of health hazardous dusts and mist.
Dependent on the material which need to be processed and the used auxiliaries dusts and mist may
be caused which might impair you health.
Make sure that the generated health hazardous dusts and mist are safely sucked off at the point of
origin and is dissipated or filtered from the working area.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Before processing inflammable materials (e.g. aluminium, magnesium) or using inflammable
auxiliary materials (e.g. spirit) it is necessary to take additional preventive measures in order to
safely avoid health risks.
1.8

Safety devices

Use the grinding machine only with properly functioning safety devices.
Stop the grinding machine immediately if there is a failure on the safety device or if it is not functioning for
any reason.
It is your responsibility!
If a safety device has been activated or has failed, the grinding machine must only be used if you

have removed the cause of the failure,
EN GZ grinding machines
26 Translation of original instruction Version 1.0.2 - 2021-5-5