Liability Claims For Defects / Warranty - Optimum OPTigrind GZ 20C Betriebsanleitung

5 Appendix
5.1 Copyright
This document is copyright. All derived rights are also reserved, especially those of translation, re-printing,
use of figures, broadcast, reproduction by photo-mechanical or similar means and recording in data proces-
sing systems, neither partial nor total.
Subject to technical changes without notice.
5.2

Liability claims for defects / warranty

Beside the legal liability claims for defects of the customer towards the seller the manufacturer of the product,
OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant any further warranties
unless they are listed below or had been promised in the frame of a single contractual agreement.

The processing of the liability claims or of the warranty is performed as chosen by OPTIMUM GmbH eit-
her directly or through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by compo-
nents which are free from defects. The property of replaced products or components passes on to OPTI-
MUM Maschinen Germany GmbH.

The automatically generated original proof of purchase which shows the date of purchase, the type of
machine and the serial number, if applicable, is the precondition in order to assert liability or warranty
claims. If the original proof of purchase is not presented, we are not able to perform any services.

Defects resulting of the following circumstances are excluded from liability and warranty claims:
- Using the product beyond the technical options and proper use, in particular due to overstraining of the
machine.
- Any defects arising by one's own fault due to faulty operations or if the operating manual is disregar-
ded.
- Inattentive or incorrect handling and use of improper equipment.
- Non-authorized modifications and repairs.
- Insufficient installation and safeguarding of the machine
- Disregarding the installation requirements and conditions of use.
- Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences.

The following items are as well not subject to the liability or warranty claims:
- Wearing parts and components which are subject to a standard wear as intended such as e.g. V-belts,
ball bearings, illuminants, filters, sealings, etc.
- Non reproducible software errors

Any services which OPTIMUM GmbH or one of its agents performs in order to fulfill in the frame of an
additional guarantee are neither an acceptance of the defects nor an acceptance of its obligation to com-
pensate. Such services do neither delay nor interrupt the warranty period.

Place of jurisdiction among traders is Bamberg.

If one of the above mentioned agreements is totally or partially inefficient and/or null, it is considered as
agreed what is closest to the will of the warrantor and which remains in the framework of the limits of lia-
bility and warranty which are predefined by this contract.
5.3 Note regarding disposal / options to reuse:
Please dispose of your device environmentally friendly by disposing of scrap in a professional way.
Please neither throw away the packaging nor the used machine later on, but dispose of them according to
the guidelines established by your city council/municipality or by the corresponding waste management
enterprise.
5.3.1 Decommissioning
CAUTION!
Immediately decommission used machines in order to avoid later misuse and endangering of the
environment or of persons.
Version 1.0.2 - 2021-5-5 Translation of original instruction
GZ grinding machines EN
35