Ec Declaration Of Conformity - Optimum OPTigrind GU 30 Betriebsanleitung

EC Declaration of Conformity

according to Machinery directive 2006/42/EC, Annex II 1.A
The manufacturer/
Distributor:
hereby declares that the following product
Product designation:
Type designation:
Bench grinder for private persons, as well as for craft and industrial plants which meets all the relevant pro-
visions of the above mentioned Directive 2006/42/EC as well as the other directives applied (below) includ-
ing their amendments in force at the time of declaration.
The following additional EU Directives have been applied: EMC Directive 2014/30/EU ; Restriction of the
use of certain hazardous substances in electrical and electronic equipment 2015/863/EU
The safety objective meet the requirement of EC Directive 2006/42/EC.
The following harmonized standards were applied:
EN 62841-3-4:2020-09: Safety of transportable motor-operated electric tools - Part 2-4: Particular
requirements for bench grinders, portable bench grinders which can be equipped with one or two insert
tools as follows: - grinding wheels form 1 according to ISO 603-4 with a diameter up to 310 mm and a
thickness up to 55 mm; - wire brushes with a diameter up to 310 mm and a thickness up to 55 mm; -
polishing wheels with a diameter up to 310 mm; and with a peripheral speed of any insert tools between 10
m/s and 50 m/s.EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
EN 60204-1:2006/A1:2009
Safety of machinery - Electrical equipment of machines - Part 1: General requirements (IEC 60204-1:2005/
A1:2008)
EN ISO 13849 - Safety of machinery - Safety-related parts of control systems
EN ISO 12100:2010
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
Responsible for documentation: Kilian Stürmer
Tel.: +49 (0) 951 96555 - 800
Address:
Kilian Stürmer
(CEO, General Manager)
Hallstadt, 2021-03-09
Optimum Maschinen Germany GmbH
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany
Grinding machine
GU30
Dr.-Robert-Pfleger-Str. 26
D - 96103 Hallstadt, Germany