Unpacking And Connecting; Scope Of Delivery; Installation And Assembly; Requirements Regarding The Installation Site - Optimum OPTigrind GZ 20C Betriebsanleitung


Other noise sources, e.g. the number of machines,

Other processes taking place in the proximity and the period of time during which the operator is expo-
sed to the noise.
Furthermore, it is possible that the admissible exposure level might be different from country to country due
to national regulations. This information about the noise emission shall allow the operator of the machine to
more easily evaluate the endangering and risks.
CAUTION!
Depending on the overall noise exposure and the basic limit values the machine operators must wear
an appropriate hearing protection. We generally recommend to use a noise protection and a hearing
protection.
3

Unpacking and connecting

The grinding machine is delivered pre-assembled.
3.1

Scope of delivery

When the grinding machine is delivered, please check immediately that it has not been damaged during
transport. Also check that no fastening screws have come loose.
Compare the delivery volume with the data on the delivery note. The grinding machines are supplied in the
standard package without grinding wheels and cleaning brushes.
Grinding wheels and cleaning brushes are available in specialist shops or from our main catalog.
WARNING!
Severe or fatal injuries may occur if parts of the machine tumble or fall down from the forklift truck or
from the transport vehicle. Follow the instructions and information on the transport case.
WARNING!
The use of unstable lifting and load suspension gear that might break under load can cause severe
injuries or even death. Check that the lifting and load suspension gear has sufficient load capacity
and that it is in perfect condition.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company. Fasten the
loads properly. Never walk under suspended loads!
3.2 Storage
ATTENTION!
In case of wrong and improper storage electrical and mechanical machine components might get
damaged and destroyed.
Store packed and unpacked parts only under the intended environmental conditions. Follow the
instructions and information on the transport case.
Consult Optimum Maschinen Germany GmbH if the machine and accessories are stored for more than three
months or are stored under different environmental conditions than those given here.
3.3

Installation and assembly

3.3.1

Requirements regarding the installation site

Organize the working area around the grinding machine according to the local safety regulations.
EN GZ grinding machines
30 Translation of original instruction Version 1.0.2 - 2021-5-5