For Your Own Safety During Operation - Optimum OPTigrind GZ 20C Betriebsanleitung

1.11

For your own safety during operation

WARNING!
Before activating the grinding machine assure yourself that this will neither endanger other persons
nor cause damage to equipment.
CAUTION!
Change the position of the protective cover for the cleaning brush only when the grinding machine is
not in operation. Grinding machines with cleaning brushes are also available with a controlled stop
(brake).
Avoid any unsafe working practices:
 The instructions mentioned in these operating instructions have to be strictly observed during assembly, opera-
tion, maintenance and repair.

Wear safety goggles.

Wear when working with the cleaning brush an facial protection shield, if necessary also a leather apron.

Do not work on the grinding machine, if your concentration is reduced, for example, because you are
taking medication.

Stay on the grinding machine until the grinding machine has come to a complete standstill.

Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work suit and, if
necessary, a hairnet.

Make sure that nobody is endangered by your work.
1.12 Disconnecting and securing the grinding machine
Unplug the main switch before starting any maintenance or repair work.
1.13 Using lifting equipment
WARNING!
The use of unstable lifting and load suspension gear that might break under load can cause severe
injuries or even death.
Check that the lifting equipment and load-suspension gears are of sufficient load capacity and are in
perfect condition.
Observe the accident prevention regulations issued by your Employers Liability Insurance
Association or other competent supervisory authority, responsible for your company.
Fasten the loads properly. Never walk under suspended loads!
EN GZ grinding machines
28 Translation of original instruction Version 1.0.2 - 2021-5-5