Safety Instructions (Warning Notes); Classification Of Hazards - Optimum OPTIgrind GB 305D Betriebsanleitung

1 Safety
Glossary of symbols

provides further instructions

calls on you to act

listings
This part of the operating instructions

explains the meaning and use of the warning notes included in these operating instructions,

defines the intended use of the disc sander,

points out the dangers that might arise for you or others if these instructions are not
observed,

informs you about how to avoid dangers.
In addition to these operating instructions, please observe

the applicable laws and regulations,

the statutory provisions for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the disc
sander.
Always keep this documentation close to the disc sander.
1.1

Safety instructions (warning notes)

1.1.1 Classification of hazards

We classify the safety warnings into different categories. The table below gives an overview of
the classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Alarm expression
DANGER!
WARNING!
CAUTION!
ATTENTION!
INFORMATION
Safety
Version 1.0.1 - 2021-1-28
Definition / consequence
Impending danger that will cause serious injury or death to people.
A danger that can cause serious injury or death.
A danger or unsafe procedure that can cause personal injury or damage
to property.
Situation that could cause damage to the disc sander and product, as
well as other types of damage.
No risk of injury to persons.
Practical tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
Translation of original instruction
GB305D EN
19