X-Ray Exposure - VATECH Green X 18 Handbuch

X-ray Exposure

5.5
Get out of the X-ray room and close the door.
1.
Press and hold down the Exposure Switch until image acquisition is completed.
2.
Release the Exposure Switch when the "Image capturing is completed"
3.
message appears on the screen.
Green X 18 TM (Model: PHT-75CHS) User Manual
▪
If an emergency occurs during image acquisition,
release the Exposure Switch to cease X-ray emission.
▪
The operator shall always observe the X-ray safety
regulations applicable to his/her area during this
equipment's operation.
▪
The operator must always keep vocal/visual contact with
the patient during the image acquisition process.
▪
Do not operate the PC during exposure. Doing so may
cause the system to malfunction.
▪
Let the patient close his or her eyes during the
operation.
▪
To acquire optimized images, instruct the patient to hold
his/her breath and not to swallow. Also, do not let the
patient move until the Temple Supports are open.
The operator must always keep vocal/visual contact with the
patient during image acquisition.
Yellow: X-ray On
The image appears on the screen.
During X-ray exposure, the status appears as follows.
▪
The LED light of the Exposure Switch turns yellow.
▪
The LED light on the top of the equipment turns yellow.
▪
An alert sound comes out to indicate that X-ray emission
is currently underway.
▪
On Console Software, the radiation mark turns Green.
5. Acquiring CBCT Images
77