VATECH Green X 18 Handbuch Seite 74

5. Acquiring CBCT Images
Second Scan Steps of Double Scan
5.3.2
Select the Maxilla as the Vertical Option. It is automatically selected.
1.
The tube voltage and tube current values are automatically set according to the
2.
patient's performance and X-ray intensity. If you click the arrow button, you can
make fine adjustments in ± 1 kVp, ± 0.1 mA increments
Click the CONFIRM button
3.
Guide the patient to the equipment and align the patient's posture. For more
4.
information on patient posture alignment, see section 5.4 Patient Positioning.
Press the READY button. At this time, X-rays are not irradiated.
5.
Go to 5.5 X-ray Exposure and proceed with X-ray exposure.
6.
Guide the patient out of the shielded room with equipment.
7.
Move to the 5.6 Finishing the Scan to finish shooting and check the image.
8.
66
When you click the CONFIRM button
▪
The rotating unit moves to the initial position.
▪
The vertical beam is activated to make patient
positioning easier.
▪
The DAP (Dose Area Product), Scan Time, and
Exposure Time will be displayed below the Scan
Information window.
Green X 18 TM (Model: PHT-75CHS) User Manual