Maintenance And Service - Bosch GTM 12 JL Professional Originalbetriebsanleitung

OBJ_BUCH-1688-005.book Page 50 Wednesday, June 17, 2015 9:11 AM
50 | English
– Hold the parallel guide in this position and tighten the left
and right set screw 74 with the slotted screwdriver provid-
ed. (see figure I4)
– Remove the parallel guide from the saw table.
– Screw the centre set screw 74 in or out until it is flush with
the glide pad surface.
– Hold the respective position of each set screw and tighten
all screws 73 again. (see figure
If the parallel guide can no longer be firmly attached onto the
saw table after aligning, reset the tensioning force of the guide
71. (see "Adjusting the Tension Force of the Parallel Guide",
page 49)

Maintenance and Service

Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the lighting and laser unit (34, 19) regularly.
To clean the laser lens cover 16, completely unscrew the
screw. Afterwards, pull the cover out of the casing alongside
the retracting blade guard 20. (see figure h)
Accessories
Material clamp
Insert plate
Dust bag
Material stop
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 305 x 30 mm, 40 teeth
Saw blades for aluminium
(Operation as Chop and Mitre Saw)
Saw blade 305 x 30 mm, 96 teeth
1 609 92A 18Z | (17.6.15)
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
I5)
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Article number
Customer Contact Center
1 619 PA4 166
Inside Australia:
Phone: (01300) 307044
1 619 PA4 167
Fax: (01300) 307045
1 619 PA4 560
Inside New Zealand:
2 608 005 131
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
2 608 640 440
www.bosch.com.au
Republic of South Africa
Customer service
2 608 640 453
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
Bosch Power Tools