Herunterladen Inhalt Inhalt Diese Seite drucken

Led Display; Mounting Head / Processor - Balluff BIS C-60 3 Serie Handbuch

Elektronische identifikations-systeme
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

C60_3-025_825645_1310_e.p65
79
Function displays
on BIS C-60_3
80
Orientation of the
read/write head or
adapter
Mounting the
BIS C-6003
processor
80
english

LED Display

The BIS C-60_3 uses the three side-mounted LED's to indicate important conditions of the
identification system.
Status
LED
MOD / NET STATUS
off
green flashes Device is operating in normal mode, the connection is
green
red flashes
red
CT1 Present / operating green
yellow
yellow flashes Cable break to read/write head or not connected.
off
CT2 Present / operating green
yellow
yellow flashes Cable break to read/write head or not connected.
off
If all three LED's are synchronously flashing, it means a hardware error. Return the unit to the factory.
BIS C-6003

Mounting Head / Processor

Depending on model, the processor is equipped with a read/write head or the adapter for
offset read/write heads. Both the read/write head and the adapter can be rotated by the user
by + or –90 deg. to the
desired position (see draw-
ing). Be sure that power is off
first. Loosen both screws
(indicated with arrows).
Carefully pull the head or
adapter out towards the side
(direction of arrow, right
drawing).
Caution: wires inside!
Reattach at the desired
orientation and screw tight
again.
The processor is attached
using 4 M4 screws.
Meaning
Device is not ready
– Device has not yet carried out the Dup_MAC-ID
Test noch
– Device does not have power
not opened on the Master
Device is operating in normal mode, the connection is
opened on the Master
Correctable error and/or one or more I/O connections
is in Time-Out status
Non-correctable error. Device cannot open
communication on the bus.
Data carrier read/write-ready at read/write head 1.
Read/write command at read/write head 1 in process.
No data carrier in read/write range of read/write head 1.
Data carrier read/write-ready at read/write head 2.
Read/write command at read/write head 2 in process.
No data carrier in read/write range of read/write head 2.
english
Caution: wires inside!
Head 1 Head 2
12
35
82
90
79
4.3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Bis c-6003Bis c-6023

Inhaltsverzeichnis