Introduction Bis C Identification Systems - Balluff BIS C-60 3 Serie Handbuch

C60_3-025_825645_1310_e.p65
5
Principles
☞
Applications
6
System Components The main components of the BIS C Identification Systems are:
Configuration with
BIS C-6003
processor
(connection with
Trunk lines)
Schematic
representation of an
Identification System
(example)
6 english
Introduction
BIS C Identification Systems
This manual is designed to assist the user in setting up the control program and installing and
starting up the components of the BIS C Identification System, and to assure rapid, trouble-
free operation.
The BIS C Identification Systems belongs in the category of
non-contact systems for reading and writing.
This dual function permits applications for not only transporting information in fixed-program-
med data carriers, but also for gathering and passing along up-to-date information as well.
If 2 read/write heads are connected to a BIS C-60_3 processor, both heads can be operated
independently of each other. This means for example that you can read a data carrier from one
head while writing to another data carrier at the other head.
Some of the notable areas of application include
– for controlling material flow in production processes
(e.g. in model-specific processes),
for workpiece conveying in transfer lines,
in data gathering for quality assurance,
for gathering safety-related data,
– in tool coding and monitoring;
– in equipment organization;
– in storage systems for monitoring inventory movement;
– in transporting and conveying systems;
– in waste management for quantity-based fee assessment.
Introduction
BIS C-6003 Identification Systems
– Processor,
– Read/Write Heads and
– Data carriers
DeviceNet
Processor BIS C-6003
with
adapter
Processor BIS C-6003
BIS C-65_
with head
1 ) BIS C-3_ _ series, except BIS C-350 and -352
Processor BIS C-6003
with
BIS C-670
adapter
Read/write
head 2)
BIS C-35_ BIS C-3_ _
Data carriers BIS C-1_ _-...
2 ) only BIS C-350 or -352
5
english
BIS C-650
Read/write
heads 1)
BIS C-3_ _