IDEAL AP 40 Betriebsanleitung Seite 55

Problem
The power plug and
outlet feel hot.
There is a strange
smell.
The fan speed is weak.
The product is not
purifying the air.
The display panel is
dim.
Check / Actions to take
Is the plug securely plugged in?
Make sure the plug is properly plugged into the
Make sure the plug is properly plugged into the
outlet.
outlet.
Is it being used in a place with a lot of smoke,
dust, or odors?
Clean the air intakes on either side and clean the
Clean the air intakes on either side and clean the
pre-filter.
pre-filter.
When cooking foods with strong odors, reduce use
When cooking foods with strong odors, reduce use
of the unit as much as possible.
of the unit as much as possible.
The filters may become permeated with cooking odors,
The filters may become permeated with cooking odors,
possibly affecting their performance and service life.
possibly affecting their performance and service life.
Contact the customer service center to confirm the
Contact the customer service center to confirm the
exact cause.
exact cause.
Replace the carbon deodorization filter (CD) and
Replace the carbon deodorization filter (CD) and
Anti-microbial True HEPA filter.
Anti-microbial HEPA filter.
Is the Filter Replacement Reminder indicator light
on?
Change the filters as required.
Change the filters as required.
Is it in Sleep mode?
Sleep mode is activated through automatic detection of
Sleep mode is activated through automatic detection of
a room´s brightness or darkness. During Sleep mode, the
a room' s brightness or darkness. During Sleep mode, the
display panel´s level of illumination is reduced by half.
display panel' s level of illumination is reduced by half.
Is the detection window of the Light Sensor
blocked by debris?
Remove any debris from the Light Sensor
Remove any debris from the Light Sensor
detection window.
detection window.
- 55 -
ProSource Packaging, Inc.
14911 Stuebner Airline Rd. Ste. A Phone: (281) 453-8801
Houston, TX 77069 www.machine-solution.com