Cleaning The Pre-Fi Lter - IDEAL AP 40 Betriebsanleitung

2. Cleaning the Pre-filter
Intervals between filter cleanings may vary depending on the air quality.
Use a vacuum cleaner or soft brush to clean the Pre-filter. If it is heavily
soiled, wash it with a solution of water and mild detergent.
To clean the sensor area, use only water. Do not use volatile substances such
as alcohol or acetone.
If washed about twice a month, the Pre-filter can be used indefinitely.
When cleaning the unit, always unplug the power cord first and
then wait until the unit has cooled off.
Do not use benzene, alcohol, or other volatile fluids, which may
cause damage or discoloration.
The Pre-filter is reusable after cleaning.
Do not use hot water over 40°C or volatile fluids such as paint
thinner.
If the filter is too soiled to clean, then replace the filter.
After washing the filter, allow it to dry completely in a well-
ventilated area. Otherwise, it may develop a bad odor.
- 51 -
ProSource Packaging, Inc.
14911 Stuebner Airline Rd. Ste. A Phone: (281) 453-8801
Houston, TX 77069 www.machine-solution.com