IDEAL AP 40 Betriebsanleitung Seite 49

Removing Filters
Be sure to turn off and unplug the unit before removing filters.
Remove the front panel by grasping its
①
upper edge and gently pulling forward.
To remove the front panel, the latch at the
lower edge of the panel must be released
from its position.
Press the tabs on the top edge to
Press the tabs on the top edge to
②
remove the CleanCel
remove the Pre-filter.
The Carbon deodorization fi lter and

The Carbon deodorization filter and
③
the Anti-microbial True HEPA fi lter
the Anti-microbial HEPA filter must be
must be removed in that order by pulling
removed in that order by pulling on the
on the numbered tags at the top.
numbered tags at the top.
Remove the Carbon deodorization
Remove the Carbon deodorization filter

fi lter before removing the
before removing the
Anti-microbial True HEPA fi lter.
filter.
® Pre-fi lter
Anti-microbial HEPA
- 49 -
ProSource Packaging, Inc.
14911 Stuebner Airline Rd. Ste. A Phone: (281) 453-8801
Houston, TX 77069 www.machine-solution.com
Latch
Tabs