Filter Assembly - IDEAL AP 40 Betriebsanleitung

AP 40

Filter Assembly

Filters should be re-assembled in the reverse order of their removal.
Insert the
①
and
that order.
Insert the
②
Replace the front panel by first inserting
③
the latch at the bottom edge and then
snapping the upper part shut.
Insert the Anti-microbial True HEPA
Anti-microbial HEPA filter
fi lter and Carbon deodorization fi lter,
Carbon deodorization filter, in
in that order.
Be sure to remove the plastic wrap from new
filters.
Operating the unit without removing the
plastic wrap from the filters may cause
abnormal noise, deformation, or fire from
overheating.
Pre-filter.
Insert the CleanCel
Fit this pair of filters into the grooves on
either side of the lower part of the unit, and
then insert the tabs at the top and gently
push until both sides of the middle section
audibly click into place.
Only genuine IDEAL fi lters should be used with this unit.
Only genuine Winix filters should be used with this unit.
14911 Stuebner Airline Rd. Ste. A
Houston, TX 77069
® Pre-fi lter
- 50 -
ProSource Packaging, Inc.
Phone: (281) 453-8801
www.machine-solution.com
Carbon
deodorization
Anti-microbial
filter
HEPA filter