Installing Fi Lters - IDEAL AP 40 Betriebsanleitung

AP 40
2. Installing filters
This product comes with all of the required filters. The protective plastic wrap must be
removed from the filters before use.
Operating the unit without removing the plastic wrap may result in product failure.
Unplug and make sure the unit is turned off before installing filters.
from its position.
A
Remove the front panel by grasping
①
its upper edge and gently pulling
forward.
To remove the front panel, the latch
at the lower edge of the panel must
be released from its position.
Press the tabs on the top edge to
B
Press the tabs on the top edge to
②
remove the
remove the
C
Pull out the new filters covered in
②
plastic wrap.
The Carbon deodorization fi lter and

The Carbon deodorization filter and
③
the Anti-microbial True HEPA fi lter
the Anti-microbial HEPA filter must be
must be removed in that order by pulling
removed in that order by pulling on the
on the numbered tags at the top.
numbered tags at the top.
Remove the
Remove the
fi lter before removing the
before removing the
D
Remove the plastic wrap from the
③
Anti-microbial True HEPA fi lter.
filter.
new filters.
Operating the unit without removing
the plastic wrap from the filters may
cause abnormal noise, deformation, or
fire from overheating.
CleanCel ® Pre-fi lter
Pre-filter.
Carbon deodorization
Carbon deodorization filter

Anti-microbial HEPA
- 42 -
ProSource Packaging, Inc.
14911 Stuebner Airline Rd. Ste. A
Houston, TX 77069
Latch
Latch
Tabs
Phone: (281) 453-8801
www.machine-solution.com